Raspberry Pi Buffer Board
Never blow up the I/O again
Materials
Gerber file
CAM/CAD data for the PCB referred to in this article is available as a Gerber file. Elektor GREEN and GOLD members can exclusively download these files for free as part of their membership. Gerber files allow a PCB to be produced on an appropriate device available locally, or through an online PCB manufacturing service.
Elektor recommends the Elektor PCB Service service from its business partner Eurocircuits or AISLER as the best services for its own prototypes and volume production.
The use of our Gerber files is provided under a modified Creative Commons license. Creative Commons offers authors, scientists, educators and other creatives the freedom to handle their copyright in a more free way without losing their ownership.
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
PCB 150719-1
Resistors
R1,R2 = 10kΩ, SMD 0603
Capacitors
C1-C8 = 100nF, 50V, 10%, X7R, SMD 0603
Semiconductors
IC1-IC4 = TXS0108EPWR, SMD TSSOP-20
Miscellaneous
K1 = 2x20 pinheader, vertical, pitch 2.54 mm or 40-pin GPIO stacking header: 2x20, extra high
K2 = 2x20 pinheader, vertical, pitch 2.54 mm
JP1,JP2 = 2 pinheader, vertical, pitch 2.54 mm
JP3 = 3 pinheader, vertical, pitch 2.54 mm
JP1,JP2,JP3 = Shunt jumper, pitch 2.54 mm
F1,F2 = PPTC Resettable Fuse, smd, polyfuse, 1210L050YR Littelfuse
PCB 150719-1 from the Elektor store [6]
PCB 150719-2 (T-board version)
Resistors
R1,R2 = 10kΩ, SMD 0603
Capacitors
C1-C8 = 100nF, 50V, 10%, X7R, SMD 0603
Semiconductors
IC1-IC4 = TXS0108EPWR, SMD TSSOP-20
Miscellaneous
K1 = 2x20 pinheader, vertical, pitch 2.54 mm or 40-pin GPIO stacking header: 2x20, extra high
K2 = 2x20 pinheader, vertical, pitch 2.54 mm
JP1,JP2 = 2 pinheader, vertical, pitch 2.54 mm
JP3 = 3 pinheader, vertical, pitch 2.54 mm
JP1,JP2,JP3 = jumper, pitch 2.54 mm
F1,F2 = PPTC resettable fuse, SMD, Polyfuse, 1210L050YR Littelfuse
PCB 150719-2 from the Elektor Store [7]
Discussion (0 comments)