Post project 49: Small Dynamic Compressor
This simple compressor circuit controls the dynamics
of a speech signal so that loud
sounds are controlled to produce
a more intelligible voice signal
in noisy environments. This is
achieved using a novel control
mechanism instead of the more usual
feedback loop.
This simple compressor circuit controls the dynamics of a speech signal so that loud sounds are controlled to produce a more intelligible voice signal in noisy environments. This is achieved using a novel control mechanism instead of the more usual feedback loop.
Don't miss any project, take out a free membership to Elektor.POST now!
This circuit uses dynamic feed-forward compression control rather than the more conventional feedback system which regulates the signal using the output signal level. Instead of a control loop this design uses a method of parallel control and despite its relative simplicity it’s surprisingly effective. An input signal with a dynamic of approximately 50 dB produces a constant output signal level ±3 dB.
Don't miss any project, take out a free membership to Elektor.POST now!
This circuit uses dynamic feed-forward compression control rather than the more conventional feedback system which regulates the signal using the output signal level. Instead of a control loop this design uses a method of parallel control and despite its relative simplicity it’s surprisingly effective. An input signal with a dynamic of approximately 50 dB produces a constant output signal level ±3 dB.