This campaign is closed


FINAL CALL !!  Avnet Silica and EBV Elektronik together are making available hundreds of development kits to interested (pro) makers. To qualify for one of these boards sent to you for free, just fill out this form. Anyone capable of writing three words of motivation can request one of the six kits listed below.

Microchip SAML10 Xplained Pro Evaluation Kit + QT7 Xplained Pro Extension Kit

  • ATSAML10E16A-AU/ATSAML11E16A-AU MCUs
  • One mechanical programmable button
  • One QTouch button
  • One user LED
  • 32.768 kHz crystal
  • ATECC508A CryptoAuthentication IC
  • mikroBUS header
  • Embedded debugger
  • Embedded current measurement circuitry
  • Self-capacitance water tolerant touch + 8 LEDs

Renesas Promotion Kit S5D9

  • S5D9 Group MCUs with a 176 LQFP package
  • Four extension connectors
  • QVGA TFT touch screen
  • Three user LEDs
  • Arduino Uno Shield compatible socket
  • Two mechanical switches
  • Two capacitive touch buttons + slider
  • Audio output
  • QSPI memory (8 MB)
  • SPI, I2C, CAN, and SCI interface.

NXP Rapid IoT Prototyping Kit

  • Kinetis K64 MCU (ARM Cortex-M4 based)
  • KW41Z Wireless MCU (BLE, Thread, Zigbee)
  • NT3H2211 NFC Forum Type 2 Tag
  • A1006 Secure Authentication & anti-counterfeit IC
  • Multiple sensors
  • Rapid IoT Studio IDE
  • Automatic source code & project generation for MCUXpresso IDE/SDK
  • iOS/Android mobile apps and IoT Cloud connect platforms
  • Expandable to most IoT end-node use cases with 400+ Click boards
  • Compatible with NXP IoT Modular Gateway

Infineon XMC 2Go + S2GO Pressure DPS310

  • XMC1100 MCU (ARM Cortex-M0 based)
  • On-board J-Link Lite debugger
  • Two user LEDs
  • 2×8 pin pinheader suitable for breadboard
  • XMC software for Arduino IDE
  • Ultra-high ±0.005 hPa resolution (equating to ±5 cm)
  • Wide pressure operation range 300 hPa – 1200 hPa
  • 3 µA current consumption in low power mode
  • Temperature accuracy ±0.5°C
  • Free and easy download of Arduino libraries

ON Semiconductor Radio SoC Evaluation Board + Multi Sensor Board

  • Compliance with the Arduino form factor
  • Support for PMOD
  • On-board J-Link feature for simple debugging
  • Access to all RSL10 peripherals
  • Integrated PCB antenna
  • BME680 gas, humidity, pressure and temperature sensor
  • BNO055 intelligent 9-axis absolute orientation sensor
  • TO136 security element for IoT devices
  • NOA1306CUTAG ambient light sensor
  • Electret condenser microphone

STMicroelectronics STM32L4 Discovery Kit IoT Node

  • STM32L4 Series MCUs (ARM Cortex-M4 based) in LQFP100 package
  • Bluetooth V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module
  • 802.11 b/g/n compliant Wi-Fi module
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • HTS221 capacitive digital sensor for relative humidity and temperature
  • LIS3MDL 3-axis magnetometer
  • LSM6DSL 3D accelerometer and 3D gyroscope
  • LPS22HB absolute digital output barometer
  • VL53L0X time-of-flight and gesture-detection sensor