Rutronik offers a system memory solution for the new STM32MP1 MPU Series
Rutronik, a global distributor of electronic components is pleased to announce the availability of a system memory solution for the recently introduced STM32MP1 multicore microprocessor series.
This offers compute and graphics support combined with power-efficient real-time control and will facilitate development of high-performance solutions for Industrial, Consumer, Smart Home, Health and Wellness applications. The solution offers the combination of STM32MP1 technology with approved technology partners Nanya in the form of a 4Gbit DDR3L SDRAM 16-bit and also Toshibas 4GByte e-MMC. The multicore MPUs and the memories, recommended by ST, are available at www.Rutronik24.com
With the STM32MP1 microprocessor series (MPU), engineers can now develop a new range of applications using the new heterogeneous architecture that combines up to two Arm® Cortex®-A7 and a Cortex®-M4 core. This flexible architecture performs fast processing and real-time tasks on a single chip, always achieving the greatest power efficiency. The STM32MP1 embeds a 3D Graphics Processor Unit (GPU) to support Human Machine Interface (HMI) displays.
One Evaluation board (STM32MP157C-EV1) and two Discovery kits (STM32MP157A-DK1 and STM32MP157C-DK2) are available from Rutronik. The firmware package, STM32CubeMX facilitates software and hardware configuration of both the Cortex-A7 and Cortex-M4 cores. It handles C-code generation for the M4 core, DDR SDRAM interface configuration, and tuning tool. It can also generate Linux Device trees.
You will find more information on the STM32MP1 on the e-commerce platform www.Rutronik24.com (where you can also place orders directly): https://www.rutronik24.com/search-result/nojs:1337/qs:stm32mp1/reset:0
With the STM32MP1 microprocessor series (MPU), engineers can now develop a new range of applications using the new heterogeneous architecture that combines up to two Arm® Cortex®-A7 and a Cortex®-M4 core. This flexible architecture performs fast processing and real-time tasks on a single chip, always achieving the greatest power efficiency. The STM32MP1 embeds a 3D Graphics Processor Unit (GPU) to support Human Machine Interface (HMI) displays.
One Evaluation board (STM32MP157C-EV1) and two Discovery kits (STM32MP157A-DK1 and STM32MP157C-DK2) are available from Rutronik. The firmware package, STM32CubeMX facilitates software and hardware configuration of both the Cortex-A7 and Cortex-M4 cores. It handles C-code generation for the M4 core, DDR SDRAM interface configuration, and tuning tool. It can also generate Linux Device trees.
You will find more information on the STM32MP1 on the e-commerce platform www.Rutronik24.com (where you can also place orders directly): https://www.rutronik24.com/search-result/nojs:1337/qs:stm32mp1/reset:0
