Article
ADS1115-eBoB
ADS1115-BoB
As far as microcontrollers and some of their owners go the analog world out there first needs digitizing before it can be understood. This miniature but powerful ADC breakout board (BoB) does the job.
Materials
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
Resistors
R1-R4 = 300? 1% 0.1W, SMD 0603
R5-R8* = 0? 1%, 0.1W, SMD 0603
R9,R10 = 10k? 1%, 0.1W, SMD 0603
R11 = 1 k? 5%, 0.1W, SMD 0603
*Fit one only; default = R5
Capacitor
C1 = 100nF 10%, 16V, 0603 X7R
Semiconductors
D1-D4 = HSMS-2822-TR1G (Avago Industries)
IC1 = ADS1115IDGST (Texas Instruments)
Miscellaneous
K1,K2 = 5-pin pinheader, 0.1” pitch
Alternatively, for breadboard mounting:
K1,K2 = 5-pin pinheader, through hole, 0.1” pitch, round pins, Harwin D01-9923246
Miscellaneous
Ready-assembled board: Elektor Store # 140169-91
Optional: PCB only, Elektor Store # 140169-1, v1.0
Resistors
R1-R4 = 300? 1% 0.1W, SMD 0603
R5-R8* = 0? 1%, 0.1W, SMD 0603
R9,R10 = 10k? 1%, 0.1W, SMD 0603
R11 = 1 k? 5%, 0.1W, SMD 0603
*Fit one only; default = R5
Capacitor
C1 = 100nF 10%, 16V, 0603 X7R
Semiconductors
D1-D4 = HSMS-2822-TR1G (Avago Industries)
IC1 = ADS1115IDGST (Texas Instruments)
Miscellaneous
K1,K2 = 5-pin pinheader, 0.1” pitch
Alternatively, for breadboard mounting:
K1,K2 = 5-pin pinheader, through hole, 0.1” pitch, round pins, Harwin D01-9923246
Miscellaneous
Ready-assembled board: Elektor Store # 140169-91
Optional: PCB only, Elektor Store # 140169-1, v1.0
Discussion (0 comments)