Article
Basement Ventilation System (2)
Installing and connecting the window actuator fan
In the companion installment we describe a control unit for managing the humidity level in a basement or other damp space with a ventilation system. The relative humidity and temperature indoors and outdoors are measured using ChipCap2 sensors.
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
Platino Extension Board
Resistors
5%, 0.25W
R1,R2,R3 = 10kOhm
R4,R5 = 100Ohm
Capacitors
C1 = 100µF 50V radial
C2,C3 = 100nF
Semiconductors
D1,D2,D3 = 1N4148
T1,T2,T3 = BC337
Miscellaneous
RE1,RE2,RE3 = relay, 5V SPDT, 6A (e.g. Finder 34.51.7.005.0010)
K1 (on Platino) = 10-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K4,K5 (on Platino) = 8-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K6,K7 (on Platino) = 6-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K8 (on Platino) = 3-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
(wirewrap sockets on Platino: Farnell/Newark #1023031, 20-pin version)
K1 (on shield) = 10-pin pinheader
K4,K5 (on shield) = 8-pin pinheader
K6,K7 (on shield) = 6-pin pinheader
K8 (on shield) = 3-pin pinheader
(pinheaders on shield: Farnell no. 1022218, 32-pin version)
K10,K11,K12 = 2-way PCB screw terminal block, 0.2” pitch
K13,K14 = 4-pin pinheader, 0.1” pitch
K15,K16 = 2-pin pinheader, 0.1” pitch
K17 = DC adapter socket, PCB mount
PCB no. 140433-1
Platino Extension Board
Resistors
5%, 0.25W
R1,R2,R3 = 10kOhm
R4,R5 = 100Ohm
Capacitors
C1 = 100µF 50V radial
C2,C3 = 100nF
Semiconductors
D1,D2,D3 = 1N4148
T1,T2,T3 = BC337
Miscellaneous
RE1,RE2,RE3 = relay, 5V SPDT, 6A (e.g. Finder 34.51.7.005.0010)
K1 (on Platino) = 10-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K4,K5 (on Platino) = 8-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K6,K7 (on Platino) = 6-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
K8 (on Platino) = 3-pin wirewrap socket, 0.1” pitch, pin length 12.9mm
(wirewrap sockets on Platino: Farnell/Newark #1023031, 20-pin version)
K1 (on shield) = 10-pin pinheader
K4,K5 (on shield) = 8-pin pinheader
K6,K7 (on shield) = 6-pin pinheader
K8 (on shield) = 3-pin pinheader
(pinheaders on shield: Farnell no. 1022218, 32-pin version)
K10,K11,K12 = 2-way PCB screw terminal block, 0.2” pitch
K13,K14 = 4-pin pinheader, 0.1” pitch
K15,K16 = 2-pin pinheader, 0.1” pitch
K17 = DC adapter socket, PCB mount
PCB no. 140433-1
Discussion (0 comments)