Article
Lumina
A Bluetooth Low Energy connected lamp
The colors are mostly okay but we want lamps to be s-m-a-r-t-e-r. Like use the processing power of a smartphone to light in rhythm with music, simulate sunset when you go to sleep or turn on automatically when you walk into the room. Lumina does all that — on BLE and from your Android smartphone or tablet.
Extra info / Update
* OSRAM LE RTDUW S2W high power RGBW LED
* Bluetooth Low Energy compliant
* Elektor/Laird BL600 e-BoB
* ATMega328 micro
* Arduino-developed firmware
* 12-V 1-A DC supply
* Free Lumina Control App for Android
* Easily built into 3-piece DIY lamp set
* Free project software
* Bluetooth Low Energy compliant
* Elektor/Laird BL600 e-BoB
* ATMega328 micro
* Arduino-developed firmware
* 12-V 1-A DC supply
* Free Lumina Control App for Android
* Easily built into 3-piece DIY lamp set
* Free project software
Components
The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.
Component list
Component List
Resistors
R1,R2,R3,R4,R5,R6,R9,R10,R11,R12,R13,R14,R17 = 10kOhm, 5%, 0.1W, 0805
R7,R8,R15,R16 = 10Ohm, 1%, 0.25W, 0805
Capacitors
C1,C2 = 10µF 20V, 2312
C3 = 1µF 50V, 0805
C4,C5 = 100nF 50V, X7R, 0805
C6,C7,C8,C9 = 10nF 50V, X7R, 0805
C10,C11 = 22pF 50 V, C0G/NP0, 0805
Inductor
L1 = 10µH, 120mA, 0805
Semiconductors
LED1 = RGBW LED, Osram type LE RTDUW S2W (Newark/Farnell #2115571)
T1,T2,T3,T4 = IRFML8244TRPbF (Newark/Farnell #1857298)
IC1 = LM1086CS-5.0/NOPB (Newark/Farnell #1685485)
IC2 = MCP1700T-3302E/TT (Newark/Farnell #1296592)
IC3 = ATMega328P-AU, programmed (Elektor STORE # 130226-41)
Miscellaneous
K1 = DC adapter barrel jack, PCB mount
K2,K3 = 8-way SIL pinheader receptacle for MOD1, 0.1’’ pitch
K4 = 6-pin (2x3) pinheader, vertical, 0.1’’ pitch
MOD1 = Elektor BL600 e-BoB, ready assembled (Elektor STORE # 140270-91)
S1 = pushbutton, PCB mount, SPST
X1 = 16MHz quartz crystal, 5x3.2mm
PCB 130226-1 v. 2.0 or up
Resistors
R1,R2,R3,R4,R5,R6,R9,R10,R11,R12,R13,R14,R17 = 10kOhm, 5%, 0.1W, 0805
R7,R8,R15,R16 = 10Ohm, 1%, 0.25W, 0805
Capacitors
C1,C2 = 10µF 20V, 2312
C3 = 1µF 50V, 0805
C4,C5 = 100nF 50V, X7R, 0805
C6,C7,C8,C9 = 10nF 50V, X7R, 0805
C10,C11 = 22pF 50 V, C0G/NP0, 0805
Inductor
L1 = 10µH, 120mA, 0805
Semiconductors
LED1 = RGBW LED, Osram type LE RTDUW S2W (Newark/Farnell #2115571)
T1,T2,T3,T4 = IRFML8244TRPbF (Newark/Farnell #1857298)
IC1 = LM1086CS-5.0/NOPB (Newark/Farnell #1685485)
IC2 = MCP1700T-3302E/TT (Newark/Farnell #1296592)
IC3 = ATMega328P-AU, programmed (Elektor STORE # 130226-41)
Miscellaneous
K1 = DC adapter barrel jack, PCB mount
K2,K3 = 8-way SIL pinheader receptacle for MOD1, 0.1’’ pitch
K4 = 6-pin (2x3) pinheader, vertical, 0.1’’ pitch
MOD1 = Elektor BL600 e-BoB, ready assembled (Elektor STORE # 140270-91)
S1 = pushbutton, PCB mount, SPST
X1 = 16MHz quartz crystal, 5x3.2mm
PCB 130226-1 v. 2.0 or up
Discussion (0 comments)