Become a Member
Article

Motor Driver Breakout Board

A BoB for a 5 A DC Motor Driver with a 3×3 mm Size

Motor Driver Breakout Board
Motor Driver Breakout Board
Today's makers and students are often in a hurry and lack the skills to design and solder electronic circuits. They are more into “shields,” and handling a soldering iron is a challenge. So, I’ve developed a breakout board for the Monolithic Power Systems MP6619 motor driver, which can be used well for one’s own motor-based projects.

Downloading of this magazine article is reserved for registered users only.

Login | Register now!
 

Materials

Component list

Component List

Resistors

(SMD 0805)

R1, R3 = 10 Ω

R5 = 100 kΩ

R8 = 0Ω04, 2 W, SMD 2512

R9, R10 = 1 kΩ

R13 = 80 kΩ

 

Capacitors

C1, C3, C5 = 100 nF, 50 V, SMD 0805

C7, C10 = 4.7 µF, 35 V, SMD 1210

C8 = 100 µF, 35 V, electrolytic, ø 8 mm

 

Semiconductors

D2 = LED, red, SMD 0806

D4 = LED, green, SMD 0805

IC1 = MP6619GQ-P, QFN-19

 

Miscellaneous

J2, J4, J5, J6 = 2-pin pin header, 1/10″ (2.54 mm)

J3 = 6-pin pin header, 1/10″ (2.54 mm)

BoB PCB (see text)

Discussion (0 comments)

Embed Code