Become a Member
Article

Configuring the Elektor BME280 break-out board

Configuring the Elektor BME280 break-out board
Configuring the Elektor BME280 break-out board
A few years ago Elektor published a little break-out board (BoB) for the Bosch Sensortec BME280 environmental sensor. Because the sensor can be configured to communicate over either an [DTP: 2-superscripted] I2C or an SPI bus, we received questions from users about how to do this. For sure, relevant information got posted on the Elektor Labs website [1] but not everybody has the reflex of checking there. Hence the 'hard copy' version here.

Downloading of this magazine article is reserved for registered users only.

Login | Register now!
 

Materials

Components

The BOM (Bill of Materials) is the technically exhaustive listing of parts and other hardware items used to produce the working and tested prototype of any Elektor Labs project. The BOM file contains deeper information than the Component List published for the same project in Elektor Magazine. If required the BOM gets updated directly by our lab engineers. As a reader, you can download the list here.
Want to learn more about our BOM list? Read the BOM list article for extra information.

Download the BOM list

We buy at:

RS_logo
botfactory

Discussion (0 comments)

Embed Code