Circuit: Simple Transistor Tester with LED or Piezo Buzzer indicator

A transistor tester can be a handy addition to your electronics workbench. This versatile transistor tester design, first presented a decade ago, enables you to quickly assess the functionality of NPN/PNP transistors, JFETs, or (V)MOSFETs, and helps you accurately identify their leads.

Transistor Tester Design

A three-legged transistor or FET can be connected in six possible configurations, but only one is correct. This compact circuit offers a straightforward and reliable way to identify the correct configuration while simultaneously performing a functional test of the device. The tester circuit itself includes a transistor that, when paired with the transistor under test (TUT), forms a multivibrator circuit. The tester features five closely positioned sockets, each clearly labeled for easy identification:
 

• E/S – B/G – C/D – E/S – B/G

This enables testing using the following configurations:

• Bipolar Transistors: EBC / BCE / CEB and reversed: BEC / ECB / CBE.
• Unipolar Transistors (FETs): SGD / GDS / DSG and reversed: GSD / SDG / DGS. According to Hans-Norbert Gerbig, “the multivibrator oscillates and flashes the high-efficiency LED when the test transistor is correctly connected.” Refer to the circuit using an LED.


“The LED may also flash when the E and C leads are switched, but the flash rate will be faster,” Gerbig explained. “This reflects the fact that some types of transistor will operate with their emitter and collector leads switched although their performance characteristics will not be the same as a correctly configured device.”

Version 2 of the tester features a piezo buzzer in place of the LED indicator. The value of the frequency determining capacitor has been reduced compared to its value in the other version so that the oscillation frequency is audible.
  “A low buzz indicates that the transistor is correctly configured and working, no sound indicates the test transistor is either wrongly configured or dead.”

Simple Tester Article

Gerbig’s article, “Simple Transistor Tester,” was published in Elektor July/August 2014. We’ve made the article freely available to everyone in the community. Enjoy!

---

Editor's Note: This article was originally published in a previous edition of our magazine. Please note that some of the products (e.g., PCBs) and links may no longer be available. However, we believe the educational content remains valuable and hope it inspires you to embark on new and exciting projects.