| Guitar amplifiers using output devices such as the TDA7293 (100 W) or LM3886 (68 W) are surprisingly often damaged as a result of excessive...
| Guitar amplifiers using output devices such as the TDA7293 (100 W) or LM3886 (68 W) are surprisingly often damaged as a result of excessive...
| Tubes (thermionic valves) have never departed from the amplified instrument scene and the majority of guitarists, including very young ones,...
| The amplifier described is intended as a practice unit for guitar players. Its power output is not sufficient (in most cases) for use duri...
| lt often happens that an electric guitar has to be connected to a mixing panel, a tape deck or a portable studio. As far as cabling is co...
| 14 INTERMEDIATE PROJECT A series of projects for the not-so-experienced constructor. Although each article will describe in detail the opera...
| portable guitar amplifier The controls for bass, mid-range, and high frequencies on most commercial guitar amplifiers may be compared with t...
| // the ratio of R2 + R3 + P1 to R3 + P1. The input impedance, which, at 1 M, is quite high, is de- fined by R1 as the op-amp has FET inputs....
| 5-32 - elektor may 1982 the Elektor Artist flii iÃÇI a versatile electric guitar preamplifier This preamplifier is a companion to the 100 W...
| 1-42 — elektor january 1982 guitar amplifier philosophy guiMr amplifier philosophy "tubes" and transistors Guitar sound systems rarely com...