| Michael Horne’s innovative DIY project is a portable, battery-powered temperature, humidity, and pressure sensor using a Raspberry Pi Pico W...
| Michael Horne’s innovative DIY project is a portable, battery-powered temperature, humidity, and pressure sensor using a Raspberry Pi Pico W...
| In contrast to the ESP8266, the ESP32-C3 is equipped with a Bluetooth Low Energy RF communication link. If you only need to send small amoun...
| This is a submission from Sensirion. The company has entered into a cooperation with Alps Alpine in the field of humidity and temperature se...
| Breakout board for AMS I2C ENS210 humidity/temperature sensor
| On show at this year’s Sensor + Test 2016 measurement fair in Nuremburg was the latest SHT3x range of humidity sensors from Sensirion. In a...
| The HDC1050 from Texas Instruments is a tiny 3 mm square combined humidity and temperature sensor. It can operate from a supply rail of 3 to...
| The starting point for this project was some newish resistive air humidity sensors, whose resistance varies in the range 1 kOhm to 10 MOhm....
| Most sensors are inherently analogue and in general it is necessary to amplify, compensate and calibrate their outputs before digitising the...
| This stand-alone data logger displays pressure, temperature and humidity readings generated by I2C bus sensors on an LCD panel, and can run...
| The MAX187 serial12-bit analogue-to-digital converter (ADC) operates from a single +5V supply, and accepts a 0 V to 5 V analogue input. The...